ROHN 5/8TBE&E 5/8" x 12" Tear Eye to Eye Turnbuckle for Tower Guy
Used in Tower Guy to Anchor connections. Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.
Note: Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Preformed deadend and 3/8THH, 5/16" Strand via Preformed deadend and 7/16THH or 5/16" Bare Strand via Cable Clamps and 3/8THH, 3/8" Strand via Preformed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343). 17,500 lbs. Ultimate Strength. Eye to Eye Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Preformed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate (the ones that use Bolts as the attachment Method, ie; GAC303 and GAC305) attached the Anchor on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Compare to ROHN 5/8TBE&E 5/8 inch Eye to Eye Turnbuckle!