Call: (407) 944-8856

3 inch HDG Heavy Duty Wall Mount Bracket 3S-WM3

3 inch HDG Heavy Duty Wall Mount Bracket WB2

Highlights

HDG Finish
14 gauge Steel
Adjustable from 1.25 to 2.38 inch DIA
HDG Lag Bolt Hardware included
Wall Mount for:
ROHN H20, H30, H40, H50

Channel Master 1820, 1830, 1840, 1850

2 Brackets per kit

Price: $10.95

Manufacturer Code: 3S-WM3

Stock Level: 2425

Qty:

Add to Cart View Cart Shipping Calculator

Availability: Usually ships in 24 Hrs

Shipping: Can ship anywhere

3STAR WM3 Telescopic Antenna Mast 3 inch "W" HDG Wall Mount Bracket

(this order is Set of 2 Wall Brackets come with HDG Lag Bolts ) is designed to Wall Mount ROHN H50, H40, H30, H20 Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts. Hot Dipped Galvanized , 14 gauge steel , adjustable for Clamping Antenna Masts from 1.25 to 2.50 inches in Diameter. This Bracket will Stand off any Antenna Mast within this Diameter range, but is not designed to support the weight of any Telescopic Antenna Mast off of the Ground. Bonding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance.

EZ46-3 Pitch Pad Kit with Screws - $3.95

EZ 46-3 Pitch Pad Kit with Screws

Made in the USA!
Complete with (3) 3 x 1.5" Moisture Barrier Pitch Pads and (6) 2 x 1/4" Hex Head Integral Washer Lag Screws for Weather-Proof Bracket Mounting to Exterior Surfaces. Most popular screw size for the majority of Antenna Mast Bracket Installations..
Read More

EZ46-3PO Pitch Pad Moisture Barrier Kit - $1.90

EZ 46-3PO Pitch Pad Only Kit
Made in the USA!
Comes with ( 3 Pitch Pads 3" x 1.5" only) for Weather-Proofing Bracket Mounting Installations on Exterior Surfaces...

Wall & Eave Mount Brackets

Wall & Eave Mount Brackets for Satellite TV Antenna Mast, Cellular Wireless Internet, Business Band and Telescopic Antenna MastsIt is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.