ROHN 3/8TBE&J 3/8" x 6" Round Eye to Jaw Turnbuckle for Tower Guy
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Jaw, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs. Turnbuckle are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end. The body of the turnbuckle is reverse thread on opposite ends to allow tightening/loosening by simply turning the body of the turn buckle. Made of galvanized steel, our turn buckles are built to last and weather resistant.
Note: Typical Use: when attaching and tensioning ROHN Tower and Telescopic Antenna Mast Down Guy terminations (3/16" Strand via Preformed dead-end and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, or 618/620 Bare Wire via Cable Clamps/Gripple and 1/4TH) to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343). Eye to Eye Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Preformed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate (the ones that use Bolts as the attachment Method, ie; GAC303, GAC305, EP25343 and EP25345) attached to the Anchor on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.