ROHN 1/2TBE&J 1/2" x 12" Tear Eye to Jaw Turnbuckle for Tower Guy
Used in Tower Guy to Anchor connections. Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.
Note: Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (3/16" Strand via Preformed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Preformed deadend and 3/8THH, or 5/16" Bare Strand via Cable Clamps and 3/8THH) to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP or GAC5655TOP). 11,000 lbs. Ultimate Strength. Eye to Jaw Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Preformed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate or Closed Single Eye Anchor (the ones that Holes as the attachment Method, ie; GAR30 and GAC3455) on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Compare to ROHN 1/2TBE&J 1/2 inch Eye to Jaw Turnbuckle!