Call: (407) 944-8856

1/2TBE&E Tower Guy Turnbuckle 1/2 x 9 inch Eye to Eye Tear

ROHN 1/2TBE&E 1/2 x 9 inch Tear Eye to Eye Turnbuckle for Tower Guy
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lb.

Note: Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (3/16" Strand via Preformed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Preformed deadend and 3/8THH to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343). 11,000 lbs. Ultimate Strength. Eye to Eye Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Preformed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate (the ones that use Bolts as the attachment Method, ie; GAC303 and GAC305) attached the Anchor on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Compare to ROHN 1/2TBE&E 1/2 inch Eye to Jaw Turnbuckle!

Specification Sheet

Spec Sheet