Printer View Tell a Friend

Signal Vision 4-Way Vertical Splitter 5-1000 MHz. -W- Ground

Highlights

5-1000 MHz. Bandwidth
40 dB port-to-port isolation*
35 dB output return loss*
Intermod Protected
Capacitor Decoupled
Dual Plated
Flat F-Ports
100% Soldered backplate
*(Return Band)

Bulk Quantities Available Here!

Price: $4.60
Manufacturer Code: SV-V4G
Stock Level: 197
Qty:
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
Signal Vision SV-V4G 4-Way Vert. Splitter 5-1000 MHz. with Ground.
SV-V4G series digital splitter by Signal Vision provide Superior Electrical Performance at Full 1 GHz Analog and Digital Transmissions...This Splitter Line has a Built-in split-bolt type ground on a Dual plated bright tin over copper flash Housing, sealed with a Solder sealed proprietary back plate, resulting in a Moisture sealed housing (15 psi) with No casting lines on ports. Patented dual-spring conical contacts surface mount technology.
Product isn't rated yet. Write a review.

4-Way Splitters are typically the Part you would use to take One (1) cable Feed and "Split" it into Four (4) in order to Provide Signal to 4 Independant Devices, or Three More Cables to complete the Run(s) to their Final Destination(s). Please be Sure to Select the Appropriate Splitter not just By Manufacturer and Price. But Rather, Consider the Specifics of Bandwidth, Packaging (Indoor vs. Outdoor), Loss, Powering Requirements Up/Down-Stream and the Overall Needs of the Final System You Wish to Create...

If you are adding a splitter to an existing Cable TV or Antenna feed, you may need to compensate for the loss that you are about to introduce. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.

Commensurate with Coaxial Cable TV Antenna Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The Integral Grounding Block designed onto every Outdoor Use Compatible RF Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!