ROHN RSL50L15 Complete 50 Foot Tube Bracing Tower Kit
U-Shaped Legs allows for simple lap splice connection. Pre-punched holes for attachment of safety climb systems, mounting kits, etc., braces for each section are the same length, while bolt lengths are standard throughout the tower. Tower material is Hot-Dipped Galvanized, Assembly drawings provided with tower, top closing angle standard with each tower package.
Structure Classification – 11
Exposure Category – C
Topo-Graphic Category - 1
3-Second Gust Wind Speed -w- Ice - 40 MPH
Design Ice Thickness - 1"
Earthquake Spectral Response Acceleration - 2.50
Heavy Tube Bracing Dish Loading
RSL50L05 50 Foot Tube Bracing Tower |
||
Sections |
R1 – (Tube) Section 1 R2 – (Tube) Section 2 R3 – (Tube) Section 3 R4 – (Tube) Section 4 R5 – (Tube) Section 5 |
|
Bolt Kits |
5 |
|
Top Kit |
RSLH1A |
|
ACWS Anti-Climb Warning Sign |
||
Assembly Guide |
||
OPTIONS |
||
Short Base |
RSB05 |
|
Anchor Bolts |
RAL05 |
|
Grounding Kits |
Grounding Kit (3 Leg) Grounding Kit (1 Leg) |
RGKG RGKG-1 |
Site-specific designs are available upon request
Optional Accessories are available and may be ordered separately:
*Per Rev G requirements, any structure greater than 10', requires a climber safety device.
Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesiveness of the soil to prevent the chance of tower tip over, as well as the strength of the tower members to withstand these Forces against them.
ROHN Tower Kits are designed based on assumptions made regarding Wind Speed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, fill out this form and send it to support@3starinc.com
RGKG RSL Grounding Kit - 1 Leg
Rohn RSL Tower Grounding kit, per Rev. G, (1) 5/8” x 8’ ground rod, 7/16” IWRC stranded galvanized ground lead and clamps for one tower leg.
Read More
RGKG RSL Grounding Kit - 3 Legs
Rohn RSL Tower Grounding kit, per Rev. G, (3) 5/8” x 10’ ground rods, 7/16” IWRC stranded galvanized ground leads and clamps.
Read More
ROHN LRCL 5 Foot 5/8" Copper Clad Lightning Rod
5 foot by 5/8 inch copper clad Lightning Rod for Tower installation, threaded with nuts. Installs on most Tower Series Top/Beacon Plates and attachments made for this purpose...
RSLM-DLM Leg Mount
Mounts to RSL Tower leg with a 2.38” O.D. x 0.154” wall x 5’ long mounting pipe.
Read More
RACW Anti-Climb Brackets
Rohn RSL Tower Anti-Climb Brackets to be used with barbed or razor wire (wire not included). Kit includes (3) outer and (3) inner brackets with required mounting hardware.
Read More
RSLSTEP Step Bolt Kit
Rohn RSL Tower Step Bolt kit consists of (10) 5/8” x 7” steps for one 10’ tower section. Order one kit for each section of tower for step bolts on one leg.
Read More
RSLM-LMB Leg Mounted Bracket
Leg mounted bracket with a 1.90” O.D. x 0.154” wall x 6” mounting post.
Read More
RSLM-3SA Side Arm Mount
3' clear distance out Side Arm Mount using 1.90" O.D. x 0.145" wall x 8' horizontal connecting pipes and a 2.38" O.D. x 0.154" wall x 5' mounting pipe.
Read More
TTRSL50 Safety Cable System
Rohn RSL (20' - 50') Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 50 foot in height. Does not include Harness or Wire Grab.
ROHN TTFBH-2D TUF TUG Journeyman Climbing Harness with 4 "D" Rings
Part of the TUF TUG Safety System, Tower Climbing Harness...
ROHN TT-WG-500 TUF TUG Wire Cable Grab Fall Arrestor System
A Component designed to work within the TUF TUG Safety System. This is a Passive Fall Arrestor Dual Cam Wire Grab that will attach to your Harness and grab the steel strand running length-wise, up and down the Tower that was installed for this purpose...
RSLTBA Tie Back Assembly
Rohn RSL Tower Dish tie back bracket. Clamps to a leg at any location. Includes (1) bracket with required mounting hardware.
Read More
RSWGB RSL Waveguide Bracket
Rohn RSWGB Waveguide Brackets for RSL Tower. Includes a 3-hole that extends out horizontal from tower leg and includes mounting hardware.
Read More
RASK12 Accessory Shelf
Rohn Accessory Shelf for RSL Tower sections 1 and 2. Shelf mounts on tower legs approximately 4' 6" below the top. Kit includes plate and attachment hardware. Top plate, if required, must be ordered separately.
RTP12 Top Plate RSLSection R1 & R2
The RTP12 Top Plate Kit Mounts to top closing angles provided with tower kit to RSL tower section R1 or R2. Hole pattern fits TB3 ,TB4 thrust bearings and RSLTMA Top Mast Kit ( Optional ). Kit includes plate and attachment hardware.
Read MoreRSLTMA Top Mast Kit
2.38” O.D. x 0.154” wall x 3’ mast mounts to top plate kit. Top plate kit must be ordered separately.
![]() |
![]() The tabulated allowable effective projected areas (EPA) are limited to a maximum recommended value of 80 (ft2). EPA values shown as " - " indicate tower kit is not applicable for the corresponding wind speed. Site-specific designs are available upon request. TUBE BRACING |