Call: (407) 944-8856

Ordenar por:

Por Defecto

Non-Pen Mounts

Rohn Universal One Legged Mount
	Precio: $49.00 Código de Fabricante: 1LG Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN Universal One Legged Mount Made in the USA! One-Legged Gable Mount is designed for virtually all types of antennas – home, TV, MMDS, DBS and more... leer más

ROHN NPPK Non Penetrating Roof Mount NPPK
	Precio: $469.95 Código de Fabricante: NPPK Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: 2 Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN NPPK Non-Penetrating Dish Antenna Roof Peak Mount Made in the USA! This new non-penetrating peak roof mount is a great solution for broadband antennas and satellite TV dishes. The adjustable mounting plate can be center mounted or to one side as needed to accommodate your satellite TV dish mounts (not included). The 1LG mount with a base and 1-1/4” mounting tube is an option for the NPPK. leer más

ROHN FRM125 Non Penetrating Roof Mount FRM125
	Precio: $158.00 Código de Fabricante: FRM125 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRM125 Non-Penetrating Roof Mount 1.25 x 60 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection. leer más

ROHN FRM150 Non Penetrating Roof Mount FRM150
	Precio: $157.00 Código de Fabricante: FRM150 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRM150 Non-Penetrating Roof Mount 1.50 x 30 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection. leer más

ROHN FRM166 Non Penetrating Roof Mount FRM166
	Precio: $136.00 Código de Fabricante: FRM166 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRM166 Non-Penetrating Roof Mount 1.66 x 30 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection. leer más

ROHN FRM225 Non Penetrating Roof Mount R-FRM225
	Precio: $156.00 Código de Fabricante: FRM225 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRM225 Non-Penetrating Roof Mount 2.25 x 60 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount is 16 gauge Pre-Galvanized and the mast tube is thick-walled galvanized steel for corrosion protection. leer más

ROHN FRM238 Non Penetrating Roof Mount R-FRM238
	Precio: $162.00 Código de Fabricante: FRM238 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRM238 Non-Penetrating Roof Mount 2.375 x 30 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount is 16 gauge Pre-Galvanized and the mast tube is thick-walled galvanized steel for corrosion protection. leer más

ROHN FRM238SP5 Non Penetrating Roof Mount FRM238SP5
	Precio: $198.00 Código de Fabricante: FRM238SP5 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRM238SP5 Non-Penetrating Roof Mount 2.375 x 60 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount is 16 gauge Pre-Galvanized and the mast tube is thick-walled galvanized steel for corrosion protection. leer más

ROHN JRM23805 Non Penetrating Ballast Roof Mount R-JRM23805
	Precio: $435.00 Código de Fabricante: JRM23805 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRM23805 Non Pentrating Ballast Roof Mount 2.375 in. x 5 ft. Mast Made in the USA! Mast Dimensions - 2“ STD. Pipe (2-3/8 O.D.) x 60” The JRM is a non-penetrating, 5' square ballast type roof mount that supports a 5’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications. This Item Ships LTL Freight ONLY... leer más

ROHN JRM23855 Non Penetrating Ballast Roof Mount R-JRM23855
	Precio: $546.00 Código de Fabricante: JRM23855 Valoración media: Disponibilidad: Ships out in 2 -3 days! Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRM23855 Non Pentrating Ballast Roof Mount 2.375 in. x 10 ft. Mast Made in the USA! Mast Dimensions - 2“ STD. Pipe (2-3/8 O.D.) x 120” ( 2 Piece Mast 2 3/8 x 60" ) The JRM is a non-penetrating, 5' square ballast type roof mount that extends to a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications. This Item Ships LTL Freight ONLY... leer más

ROHN JRM23810 Non Penetrating Ballast Roof Mount R-JRM23810
	Precio: $532.00 Código de Fabricante: JRM23810 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRM23810 Non Pentrating Ballast Roof Mount 2.375 in. x 10 ft. Mast Made in the USA! Mast Dimensions - 2“ STD. Pipe (2-3/8 O.D.) x 120” The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications. This Item Ships LTL Freight ONLY... leer más

ROHN JRM27505 Non Penetrating Ballast Roof Mount R-JRM27505
	Precio: $465.00 Código de Fabricante: JRM27505 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRM27505 Non Pentrating Ballast Roof Mount 2.875 in. x 5 ft. Mast Made in the USA! Mast Dimensions - 2.5“ STD. Pipe (2-7/8 O.D.) x 60” The JRM is a non-penetrating, 5' square ballast type roof mount that supports a 5’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications. This Item Ships LTL Freight ONLY... leer más

ROHN JRM27555 Non Penetrating Ballast Roof Mount R-JRM27555
	Precio: $545.00 Código de Fabricante: JRM27555 Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRM27555 Non Pentrating Ballast Roof Mount 2.875 in. x 10 ft. Mast ( 2 Piece ) Made in the USA! Mast Dimensions - 2.5“ STD. Pipe (2-7/8 O.D.) x 120” ( 2 Piece Mast 2 7/8 x 60" The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications. This Item Ships LTL Freight ONLY... leer más

ROHN JRM27510 Non Penetrating Ballast Roof Mount R-JRM27510
	Precio: $558.00 Código de Fabricante: JRM27510 Valoración media: Disponibilidad: Ships out in 2 -3 days! Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRM27510 Non Pentrating Ballast Roof Mount 2.875 in. x 10 ft. Mast Made in the USA! Mast Dimensions - 2.5â€œ STD. Pipe (2-7/8 O.D.) x 120â€ The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10â€™ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications. This Item Ships LTL Freight ONLY... leer más

ROHN JRM35010 Non Penetrating Ballast Roof Mount R-JRM35010
	Precio: $588.00 Código de Fabricante: JRM35010 Valoración media: Disponibilidad: Ships out in 2 -3 days! Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRM35010 Non Pentrating Ballast Roof Mount 3.5in.O.D. x 10 ft. Mast Made in the USA! Mast Dimensions - 3â€œ STD. Pipe (3-1/2 O.D.) x 120â€ The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10â€™ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications. This Item Ships LTL Freight ONLY... leer más

ROHN BRM425 Non Penetrating Roof Antenna Mount R-BRM425
	Precio: $756.00 Código de Fabricante: BRM425 Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM425 Non-Penetrating Roof Mount 2.50 inch x 3 foot Mast Made in the USA! Mast Dimensions - 2” STD. Pipe (2-3/8 O.D.) x 34 1/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM42510 Non Penetrating Roof Antenna Mount R-BRM42510 2.38 Mast
	Precio: $834.00 Código de Fabricante: BRM42510 Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM42510 Non-Penetrating Roof Mount 2.38 inch x 10 foot Mast Made in the USA! Mast Dimensions - 2” STD. Pipe (2.38O.D.) x 10' This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM430 Non Penetrating Roof Antenna Mount R-BRM430
	Precio: $796.00 Código de Fabricante: BRM430 Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM430 Non-Penetrating Roof Mount 3.00 inch x 3 foot Mast Made in the USA! Mast Dimensions - 2-1/2” STD. Pipe (2-7/8 O.D.) x 34-1/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM435 Non Penetrating Roof Antenna Mount R-BRM435
	Precio: $812.00 Código de Fabricante: BRM435 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM435 Non-Penetrating Roof Mount 3.50 inch x 3 foot Mast Made in the USA! Mast Dimensions - 3” STD. Pipe (3-1/2 O.D.) x 34-1/4" This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM440 Non Penetrating Roof Antenna Mount R-BRM440
	Precio: $840.00 Código de Fabricante: BRM440 Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM440 Non-Penetrating Roof Mount 4.00 inch x 3 foot Mast Made in the USA! Mast Dimensions - 3-1/2” STD. Pipe (4 O.D.) x 34-1/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM445 Non Penetrating Roof Antenna Mount R-BRM445
	Precio: $922.00 Código de Fabricante: BRM445 Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM445 Non-Penetrating Roof Mount 4.50 inch x 3 foot Mast Made in the USA! Mast Dimensions - 4” STD. Pipe (4-1/2 O.D.) x 34-1/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM44510 Non Penetrating Roof Antenna Mount R-BRM44510
	Precio: $1,240.00 Código de Fabricante: BRM44510 Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM44510 Non-Penetrating Roof Mount 4.50 inch x 10 foot Mast Made in the USA! Mast Dimensions - 4” STD. Pipe (4-1/2 O.D.) x 10' This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM630M Non Penetrating Roof Antenna Mount R-BRM630M
	Precio: $1,248.00 Código de Fabricante: BRM630M Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM630M Non-Penetrating Roof Mount 3.00 inch x 4 foot Mast Made in the USA! Mast Dimensions - 2.5” STD. Pipe (2-7/8 O.D.) x 45-3/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM635M Non Penetrating Roof Antenna Mount R-BRM635M
	Precio: $1,248.00 Código de Fabricante: BRM635M Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM635M Non-Penetrating Roof Mount 3.50 inch x 4 foot Mast Made in the USA! Mast Dimensions - 3” STD. Pipe (3-1/2 O.D.) x 45-3/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM640M Non Penetrating Roof Antenna Mount R-BRM640M
	Precio: $1,248.00 Código de Fabricante: BRM640M Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM640M Non-Penetrating Roof Mount 4.00 inch x 4 foot Mast Made in the USA! Mast Dimensions - 3.5” STD. Pipe (4 O.D.) x 45-3/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM645M Non Penetrating Roof Antenna Mount R-BRM645M
	Precio: $1,248.00 Código de Fabricante: BRM645M Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM645M Non-Penetrating Roof Mount 4.50 inch x 4 foot Mast Made in the USA! Mast Dimensions - 4” STD. Pipe (4-1/2O.D.) x 45-3/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM64510M Non Penetrating Roof Antenna Mount R-BRM64510M
	Precio: $1,295.00 Código de Fabricante: BRM64510M Valoración media: Disponibilidad: Ships out in 2 -3 days! Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM64510M Non-Penetrating Roof Mount 4.50 inch x 10 foot Mast Made in the USA! Mast Dimensions - 4” STD. Pipe (4-1/2O.D.) x 117-3/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM655M Non Penetrating Roof Antenna Mount R-BRM655M
	Precio: $1,248.00 Código de Fabricante: BRM655M Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM655M Non-Penetrating Roof Mount 5.50 inch x 4 foot Mast Made in the USA! Mast Dimensions - 5” STD. Pipe (5-9/16 O.D.) x 45-3/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN BRM665M Non Penetrating Roof Antenna Mount R-BRM665M
	Precio: $1,295.00 Código de Fabricante: BRM665M Valoración media: Disponibilidad: Will Not Ship until 12/18/2019 Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM665M Non-Penetrating Roof Mount 6.50 inch x 4 foot Mast Made in the USA! Mast Dimensions - 6“ STD. Pipe (6-5/8 O.D.) x 45 -3/4” This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN Angle Antenna Gravity Roof Mount R-AAGM35
	Precio: $2,443.75 Código de Fabricante: AAGM35 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad:
ROHN AAGM35 Non-Penetrating Roof Mount 3.50 x 54 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexoganal with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN Angle Antenna Gravity Roof Mount R-AAGM40
	Precio: $2,443.75 Código de Fabricante: AAGM40 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN AAGM40 Non-Penetrating Roof Mount 4.00 x 54 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexoganal with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN Angle Antenna Gravity Roof Mount R-AAGM45
	Precio: $2,443.75 Código de Fabricante: AAGM45 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN AAGM45 Non-Penetrating Roof Mount 4.50 x 54 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexoganal with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN Angle Antenna Gravity Roof Mount R-AAGM55
	Precio: $2,443.75 Código de Fabricante: AAGM55 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN AAGM55 Non-Penetrating Roof Mount 5.50 x 54 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexoganal with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN Angle Antenna Gravity Roof Mount R-AAGM65
	Precio: $2,443.75 Código de Fabricante: AAGM65 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN AAGM65 Non-Penetrating Roof Mount 6-5/8 x 54 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexoganal with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN Angle Antenna Gravity Roof Mount R-AAGM6560
	Precio: $2,443.75 Código de Fabricante: AAGM6560 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN AAGM65 Non-Penetrating Roof Mount 6-5/8 x 60 inch Mast Made in the USA! This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexoganal with a 16” tray to fit concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN PRM635 Non Penetrating Roof Mount R-PRM635
	Precio: $1,173.00 Código de Fabricante: PRM635 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN PRM635 Non-Penetrating Roof Mount 3.50 x 50 inch Mast Made in the USA! Mast Dimensions - 3“ STD. Pipe (3-1/2 O.D.) x 50-5/16” This non penetrating roof mount is capable of supporting dishes up to 6' in diameter for PCS, wireless, cable, DBS satellite and UHF/VHF reception depending on wind and Ballast load (see details). The base of the roof mount is 10.5’ triangular using 48 standard concrete blocks used as ballast to form the base. leer más

ROHN PRM640 Non Penetrating Roof Mount R-PRM640
	Precio: $995.00 Código de Fabricante: PRM640 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN PRM640 Non-Penetrating Roof Mount 4.00 x 50 inch Mast Made in the USA! Mast Dimensions - 3.5“ STD. Pipe (4 O.D.) x 50-5/16” This non penetrating roof mount is capable of supporting dishes up to 6' in diameter for PCS, wireless, cable, DBS satellite and UHF/VHF reception depending on wind and Ballast load (see details). The base of the roof mount is 10.5’ triangular using 48 standard concrete blocks used as ballast to form the base. leer más

ROHN PRM645 Non Penetrating Roof Mount R-PRM645
	Precio: $1,173.00 Código de Fabricante: PRM645 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN PRM645 Non-Penetrating Roof Mount 4.50 x 50 inch Mast Made in the USA! Mast Dimensions - 4“ STD. Pipe (4-1/2 O.D.) x 50-5/16” This non penetrating roof mount is capable of supporting dishes up to 6' in diameter for PCS, wireless, cable, DBS satellite and UHF/VHF reception depending on wind and Ballast load (see details). The base of the roof mount is 10.5’ triangular using 48 standard concrete blocks used as ballast to form the base. leer más

ROHN PRM655 Non Penetrating Roof Mount R-PRM655
	Precio: $1,206.60 Código de Fabricante: PRM655 Valoración media: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN PRM655 Non-Penetrating Roof Mount 5.50 x 50 inch Mast Made in the USA! Mast Dimensions - 5“ STD. Pipe (5-9/16 O.D.) x 50-5/16” This non penetrating roof mount is capable of supporting dishes up to 6' in diameter for PCS, wireless, cable, DBS satellite and UHF/VHF reception depending on wind and Ballast load (see details). The base of the roof mount is 10.5’ triangular using 48 standard concrete blocks used as ballast to form the base. leer más

ROHN 25G Tower Non Penetrating Base Ballast Roof Mount - 25GBRM
	Precio: $1,985.00 Código de Fabricante: 25GBRM Valoración media: Disponibilidad: Ships out in 2 -3 days! Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN 25GBRM BRM6X Ballast Roof Mount for 25G The 25GBRM non-penetrating roof mount, is designed to support 25G tower sections. The roof mount is able to support 2 sections of 25G tower in self supporting tower applications. The base of the roof mount is 10’ square with a 16” tray to fit the concrete blocks, typically used as ballast. This Item Ships LTL Freight ONLY... leer más

ROHN Universal Roof Mount R-URM
	Precio: $650.00 Código de Fabricante: URM Valoración media: Disponibilidad: In Stock! Call to Order Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN URM Universal Antenna Roof Mount Made in the USA! Capable of supporting most TVRO, PCS, Cellular, and Microwave antennas. The Universal Roof Mount adapts to various roof pitches and the fully adjustable rear-leg allows for use on a flat or up to a 12”/12” pitched roof. Installation is easy because of the quick adaptability, plus there’s no need for concrete block. Optional Mounting Pipe for Antennas sold separately (see Details)... leer más

ROHN Saw Horse Antenna Roof Mount R-SHRM
	Precio: $820.00 Código de Fabricante: SHRM Valoración media: Mount Pipe: Disponibilidad: Usually ships in 3 weeks Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN SHRM Saw Horse Dish Antenna Roof Mount Made in the USA! Capable of supporting most TVRO, PCS, Cellular, and Microwave antennas (not included). The Saw Horse Roof Mount allows for placement of antennas on the roof peak with up to a 12”/12” pitched roof. Can also be placed on flat roof. Optional Mounting Pipe for Antennas sold separately (see Details)... leer más

Mats & Pads

Rohn Protective Rubber Mat Layer for Non-Penetrating Antenna Roof Mount
	Precio: $26.00 Código de Fabricante: FRMMAT Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: 71 Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRM-MAT Satellite Dish Non-penetrating Roof Mount Rubber Protective Mat A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Pad measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface... leer más

ROHN Protective Barrier Pad for FRM Roof Mount R-FRMPAD
	Precio: $109.95 Código de Fabricante: FRMPAD Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN FRMPAD Protective Barrier Pad for FRM Mounts A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad measures roughly 18 wide by 42 inches long, includes 2 each per set, place underneath Frame of Non-Penetrating mount, on top of Roof surface... leer más

ROHN Rubber Mat Layer for JRM Roof Mount R-JRMMAT
	Precio: $148.00 Código de Fabricante: JRMMAT Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRMMAT Protective Rubber Mat for JRM Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a JRM Non-Penetrating mount, on top of Roof surface... leer más

ROHN Protective Barrier Pad for JRM Roof Mount R-JRMPAD
	Precio: $158.00 Código de Fabricante: JRMPAD Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN JRMPAD Protective Barrier Pad for JRM Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a JRM Non-Penetrating mount, on top of Roof surface... leer más

ROHN Rubber Mat Layer for BRM4 Roof Mount R-BRM4MAT
	Precio: $110.00 Código de Fabricante: BRM4MAT Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM4MAT Protective Rubber Mat for BRM4 Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a BRM4 Non-Penetrating mount, on top of Roof surface... leer más

ROHN Protective Barrier Pad for BRM4 Roof Mount R-BRM4PAD
	Precio: $164.00 Código de Fabricante: BRM4PAD Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM4PAD Protective Barrier Pad for BRM4 Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a BRM4 Non-Penetrating mount, on top of Roof surface... leer más

ROHN Rubber Mat Layer for BRM6 Roof Mount R-BRM6MAT
	Precio: $239.95 Código de Fabricante: BRM6MAT Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM6MAT Protective Rubber Mat for BRM6 Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a BRM6 Non-Penetrating mount, on top of Roof surface... leer más

ROHN Protective Barrier Pad for BRM6 Roof Mount R-BRM6PAD
	Precio: $425.00 Código de Fabricante: BRM6PAD Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN BRM6PAD Protective Barrier Pad for BRM6/ 25GBRM Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a BRM6 Non-Penetrating mount, on top of Roof surface... leer más

ROHN Rubber Mat Layer for PRM6 Roof Mount R-PRM6MAT
	Precio: $77.40 Código de Fabricante: PRM6MAT Valoración media: Disponibilidad: Usually ships in 1 week Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN PRM6MAT Protective Rubber Mat for PRM6 Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a PRM6 Non-Penetrating mount, on top of Roof surface... leer más

ROHN Protective Barrier Pad for PRM6 Roof Mount R-PRM6PAD
	Precio: $427.50 Código de Fabricante: PRM6PAD Valoración media: Disponibilidad: Usually ships in 1 week Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN PRM6PAD Protective Barrier Pad for PRM6 Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a PRM6 Non-Penetrating mount, on top of Roof surface... leer más

ROHN Protective Barrier Pad for AAGM Roof Mount R-AGMPAD
	Precio: $574.20 Código de Fabricante: AGMPAD Valoración media: Disponibilidad: Usually ships in 1 week Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
ROHN AGMPAD Protective Barrier Pad for AAGM Mounts A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is placed underneath the Frame of the AAGM Non-Penetrating mount, on top of Roof surface... leer más

Protective Barrier Pad for Non-Pen Roof Mount
	Precio: $48.95 Código de Fabricante: 3S-PAD Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
3S-PAD Protective Barrier Pad for Roof Mount A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of Non-Penetrating mount, on top of Roof surface... leer más

3/8" Protective Barrier Pad for FRM Roof Mount 3S-FRMPAD
	Precio: $96.00 Código de Fabricante: 3S-FRMPAD Valoración media: Disponibilidad: Usually ships in 24 Hrs Nivel de Existencia: Cantidad: Añadir al carro de compras Revisar el carro de compras
3 Star FRMPAD Protective Barrier Pad for FRM Mounts A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad measures roughly 18 wide by 42 inches long, includes 2 each per set, place underneath Frame of Non-Penetrating mount, on top of Roof surface... leer más

ROHN Non-Pen Mounts

Non-Pen Mounts

Mats & Pads

ROHN offers non-penetrating roof mounts to meet a variety of communication tower needs such as Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF reception.

Designed and engineered to handle the job of getting above ground interference, each non-penetrating roof mount has been researched and developed to serve a specific purpose.

With professionally engineered construction, you can be assured you're getting a virtually maintenance-free product built to the highest standards. And because our non-penetrating roof mounts are hot-dip galvanized after fabrication, our roof mounts won't rust.

Additional features inculde:

Offer both Fixed Mounts and Ballast Roof Mounts
Galvanized for corrosion protection
Varied mast heights available
Varied mast pipe O.D. available
Quickly shipped and ;quickly assembled
Minimum bolted connections
Engineering ballast tables available
Optional roof pads and mats available
Some models are UPS shippable

ROHN Roof Mount Buyers Guide

Ballast Requirement Information

Effective Wind Velocity Formula Sheet

This Buyers Guide has will answer many questions you may have on this Product Line. Look for more detailed information and Specification Sheets covering the wind load capabilities of each. Apply the EPA or Square measurements of your Antenna to the Charts contained therein to determine style, height and ballast.

Call 877-660-0974 at anytime for assistance.