|1. ROHN H30 30 Foot Telescopic Antenna Mast Push Up Pole (42396)|
|2. 50 Foot Telescopic Push Up TV & Wireless Internet Antenna Mast (34454)|
|3. ROHN H50 Telescopic Antenna Mast (27095)|
|4. ROHN H40 40 Foot Telescopic Antenna Mast Push Up Pole (18890)|
|5. ROHN BPH25G 25G Tower Hinged Base Plate (14362)|
|6. Broadband Digital Cable TV Modem 15dB Gain Amplifier (13532)|
|7. 3 inch Telescopic TV Antenna Mast Wall Mount Bracket (12847)|
|8. ROHN 25G 45G Tower Erection Fixture Gin Pole EF2545 (12696)|
|9. ROHN H20 Telescopic Antenna Mast Push-Up Pole (12027)|
|10. TB-105 Thrust Bearing for TV Antenna Rotator Support (11062)|
It is important to choose a wall mount and wall mounting location with a picture of the finished antenna installation in mind.
Most modern exterior decorative wall finishes most often do not have the strength to hold the weight and pressure of a large TV antenna. Be sure to first select a location that lends itself to applying a vertical, cantilevered, twisting load without compromising the integrity of the wall material you affix to.
Beams and studs within the wall are an absolute must to locate when the wall composition is anything other than solid wood or concrete. Always attach to these strength members. Furthermore, think about what's underneath the wall exterior. Is it stronger, will it yield to pressure over time as well?
Sandwich additional material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from wind. Weather proof the installation to maintain the integrity of your home. Next consider the location over a lifetime of adjustments. Does it lend itself to modifications in height or direction?
Larger antennas increase the surface area presented to air movement, hence, wind-load does increase. As the length of the mast increases from its last attached point on the structure, the torque applied also increases with weight and wind-load, requiring a more substantive attachment and load-bearing material. Keep the distance minimal from the antenna to the TVs and equipment you feed, as to minimize loss and the need for amplification. Further, the NEC (national electrical code partly defines a good ground connection as being as short as possible. You must affix a connection to a good earth ground prior to premise entry or bond to an existing one.