ROHN 55G 50 Foot Self Supporting Tower 55SS050 Print this pagePrint this page
ROHN 55G 50 Foot Self Supporting Tower 55SS050
Price: $2,144.80

Grounding BGK2G x 2 (+$69.95)
Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/4" Steel Tubing
Side Rails
17" Equalateral
Triangular Design
Can be used in:
Self Support Config

Note: Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter Tower tipover, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10 ft requires a climber safety device.
Availability: Usually ships in 1 week
Shipping: Can ship only within USA
Weight: 615 lb
ROHN 55SS050 Complete 50' Self-Supporting 55G Tower Kit
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self-Supporting 50 Foot ROHN 55G Tower with EPA's (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). Refer to Larger Image, Brochure or Footer Links at the Bottom of the Page below for Ice Loading and EPA Information.

(5) 55G
(1) APL55G
(1) SB55G
(2) BGK2G (optional)

This 55G Tower is to be used in a Self-Supporting Configuration according to Use and Foundation Specifications in the ROHN Catalog. This Height Configuration relies on a SB55G Embedded in a Concrete Foundation Specified by Engineering. As a Free-Standing, Self-Supporting Structure, a 70 MPH rated 55G Tower can rise to a maximum of 60 feet. Consult ROHN 55G Catalog Links of the Footer Section at Bottom of Page for more ROHN 55G Tower Configuration, Foundation and Grounding Detail Information.

Specification Sheet
Spec Sheet spec. sheet