Plastic Coated 620 Antenna Guy Wire

Description

EZ 60 620 Antenna Mast Down Guy Wire
1000 feet of Plastic Coated, Galvanized 6 Strand, 20 AWG Guy Wire. Perfect for Light Duty Masting Down Guys. Comes as Twenty 50 foot Hank Sections in Contiguous Footage totaling 1000 feet. Strip Plastic off before Terminating Down Guy ends with cable clamps.

When Selecting Guy Wire for use in Guying Antenna Masts, Consider the Height, Antenna Size and Wind Loading being presented. This Plastic Coated, Stranded (6 Strands of 20 Gauge wire) Guy Wire is Just fine for Most all Antenna Mast Guying Scenarios, However, We recommend that You consider using this wire for Shorter, Lighter Load Applications Where Environmental, Insulative, and Protective Concerns are an issue.

Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere

Mount Accessories

The Video Mount Products Line features Versatile Mounting Options for a Wide Variety of Manufacturers and Models. By Size, here is a quick Application Chart:

Flat Panel Displays

Application	Large (42" - 63")	Mid (25" - 42")	Small (10" - 23")
Flush Wall	PDM-F or FP-LF	LCD-MID-F	LCD-F
Flush Wall / Tilt	PDM-FT	LCD-MID-FT	LCD-FT
Articulating Wall	PDM-W	LCD-2537	LCD-1
Ceiling	PDM-C	LCD-MID-C or LCD 2537C	LCD-1C
Desk	-	-	LCD-2
Dual Wall	-	-	LCD-WM2
Dual Ceiling	-		LCD-CM2
Dual Desk	-	-	LCD-DM2
Equipment Rack	-	-	ER-LCD1017
Pole	-	LCD-PA w/ LCD-2537	LCD-PA w/ LCD-1
Under Cabinet	-	-	LCD-UC1

WARNING: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight of all attached equipment and hardware. Video Mount Products will not be held liable for the improper use or installation of its products.

For a Make/Model Specific Application, annex this Tool in Your research:
Video Mount Finder

RSS

Plastic Coated 620 Antenna Guy Wire

Flat Panel Displays

Application

Large (42" - 63")

Mid (25" - 42")

Small (10" - 23")

WARNING: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight of all attached equipment and hardware. Video Mount Products will not be held liable for the improper use or installation of its products.