Pico Macom BFA BNC Male to F Female Transition Connector
This is made with an anti-corrosive finish, Commercial Grade and Quality. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. This BNC is spec'd at 50 ohms, but most RF engineers accept that the impedance is forced by the load, so itxcwill work on 75 ohm applications. The F connector is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable, but is also used for transport of IF (Intermediate Frequencies) between pieces of equipment. The F connector is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable.
Spec. Sheet
Technicians will use this transition to transition from Antenna, Cable TV and Satellite Feeds to Test Equipment Leads.Compare to Amphenol RF-BNC Connector Series
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
|
|
