HOLLAND GHS-2P 2-way 1 GHz Power Passing Cable TV Antenna Splitter The GHS Series 1 GHz Splitters are state-of-the-art product lines designed and tested using the most current procedures. New performance features have been incorporated to make both series compatible with the latest digital and return path requirements. Low intermodulation design and optimized return band prevents high cable modem signals from affecting forward band transmission. The GHS-2P Series power passing to one port splitters have been specifically designed to meet the highest electrical specifications. Careful isolation of the RF and DC path is required to prevent saturation or burn-out of the high permeability ferrite core. This has been accomplished using a separate DC bypass core material which can withstand higher impulse spikes before saturating.
There are plenty of Power Passing 2-way Coaxial Cable Splitters on the Market, but This One passes Power only on 1 Leg only off the Split. That way, you can back-feed power upstream to the HDTV Antenna Pre-Amplifier or the Cable TV In-Line Amplifier without sending Voltage throughout the entire system. Its Double Thick Plated Housing is Soldered Closed and Sealed from the Environment, as well as Transient and Spike Voltage Resistant. There's been plenty of chatter about this Product on Technical Blog Sites, this is where you get it. Get the Specifications by Clicking on the pdf Link above. It will pass Forward and Return signals; making it perfect for Splitting Cable TV with High-Speed Internet Connection Signals. The Voltage Protection also makes it suitable for splitting HD TV Antenna Signals as well. The Flat "F" Connector ends means that the connection to the RG coaxial cable you use (RG-6 or RG-11) is solid, secure and doesn't slip or back off after tightened with appropriate force (most Coaxial Cable Manufacturers specify in inch/pounds). When making RG-6 or RG-11 cable connections outside, a weather boot covering and some sort of Silicone compound are highly recommended.
Availability:Usually ships in 24 Hrs Shipping: Can ship anywhere
Holland Electronics GHS-3P 3-Way Horizontal F Port Splitter 5-1000 MHz Power Passing The GHS Series 1 GHz Splitters are state-of-the-art product lines designed and tested using the most current procedures... Shipping/ More Info Here.
Holland Electronics GHS-4P 4-Way Horizontal F Port Splitter 5-1000 MHz Power Passing The GHS Series 1 GHz Splitters are state-of-the-art product lines designed and tested using the most current procedures... Shipping/ More Info Here.
Holland Electronics LA-520 HDTV DTV Digital Off Air CATV + Satellite Amplifier 50 to 2050 MHz Our most versatile 20 dB In-line amplifier with wideband capabilites from 50 to 2050 MHz. for amplifying Off-Air TV or Cable TV Signals in addition to Satellite Signals that may be mixed together. Counter excessive Cable and Splitter losses... Shipping/ More Info Here.
Holland Electronics PS-10 DC Power Supply for Cable TV Antenna Satellite TV Amplifiers The PS-10 is a 15 VDC 100 mA Power Supply and Inserter All-in-one for 2.2 GHz In-Line Amplifiers. This Unit injects DC Voltage into Coaxial Cable for In-Line Amplifiers (see LA Series Amplifiers) used to counter the Cable and Splitter losses... Shipping/ More Info Here.