5' Foot by 1.25" OD 18 AWG Galvanized Antenna Mast Pole - Swaged | EZ 5-18S
EZ 5-18S 5 Foot 18 AWG Swaged Antenna Mast Section
Made in the USA!
This 5 Foot (60") by 1.25" OD 18 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube such as the EZ5-18, thereby extending the existing mast an additional 5 feet. Sections can be Coupled Together as to Increase Height. Manufacturers recommend that masts heights of 10 feet and higher be guyed or provided additional Support. Fits a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Selecting Antenna Mast Pipe?
Selecting the proper antenna mast pipe is crucial. Depending on the size of your antenna, it's EPA, weight and height all play a factor in selecting a supportive pole. When planning, it's best to have all the information you can get like outside diameter of your attaching method, the clearance of gutters, siding or other obstacles in the path of your erecting a mast or tower.
Here you will find standard straight pipe in 5' foot and 10' foot lengths. You can also find those same pipes with a special end called a swag. A swaged ended pipe allows you to attach several lengths of pipe together.
| Swaged End | Straight End |
 |  |
When selecting a pipe you will need to know the length, OD (outside diameter), the AWG 16 or 18 (the smaller the number the thicker the steel) and weather you'll need any swaged ended pieces. You'll then need to select the proper mounting such as wall, roof or maybe a tripod.
