CAT6 Keystone Jack Inserts
Category 6 Operates at up to 550 MHz, instead of the 350 MHz of standard CAT 5E cables. These CAT 6 keystone inserts are fully ANSI/TIA/EIA 568 B.2-1 compliant. CAT 6 jacks are compatible with the current Category 6 Equipment, as well a Legacy and CAT 5. The Enhanced Electrical Performance of CAT 6 keystone inserts ensures capacity in supporting increased Bandwidth Application Requirements. Typical applications would include, Gigabit Ethernet, Distributed Video (CCTV) over CAT 5E, Voice over IP (VoIP). These CAT 6 jacks offer Excellent Performance in all aspects of Data Transmission.
A Keystone module is an industry standard type of wall jack used in residential and business environments. The system consists of a modular face plate to which jacks are mounted. Flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system.
A keystone jack module is a standardized snap-in package for mounting a variety of low-voltage electrical jacks such as TV, Phone, LAN, Data, BNC, RCA or optical connectors into a keystone wall plate, surface-mount box, or a patch panel. Keystone modules have a commonly popular standardized rectangular face of 14.5mm wide by 16.0mm high and are held in place with a flexible tab. This allows them to be snapped into or out of a mounting plate with correspondingly-sized rectangular holes, called ports. All keystones, regardless of the type of jack they carry, are interchangeable and replaceable. This is what makes Keystone a popular choice in today's installations at Home or Office. Some keystones use a pass-though type connector, where there is a jack on both the front face as well as the rear side. Others only have a jack on the front and employ a different means for hard-wiring signal cables in the rear, such as a mini 110, insulation-displacement connector, crimp or solder connection.