DCP BR-4XD 4" Stand-off "W" Galvanized Steel Wall Mount
Made of Galvanized Steel for TV Antenna Mast Mounting on Wall Surface. 2 inch Hardware included. For Mounting Mast from 1 to 2.25 Inches in Diameter and up to 10 Feet in Height (Depending on Antenna Size). Professional Grade, Sturdy.(Mast not Included)
This Wall Mount Bracket for Antenna Masts is made of Sturdy Pre-Galvanized Steel with over 2 and 1/4 inches between the Clamp Bolts; applicable to 2 inch diameter Antenna Masts, as well as the ROHN H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescoping Masts with a healthy 4 inches of clearance that most "W" brackets afford. If You need to Install a Smaller TV Antenna Mast, it can accomodate from 1.25 inch diameter Masting for antennas (which is normal) safely with the Hardware that is supplied. If you are Installing 2 inch diameter masts, use shorter "W" Brackets instead and run the Mast length all the way to the Ground, resting the weight on a Mast Ground Plate and affix an Earth Ground there with a 5/8 inch diameter, 8 foot long Ground Rod as a minimum.
This Bracket is no longer Manufactured as Thomas and Betts has purchased Diamond Communications Products and discontinued carriage in their Product Line. We have replaced this Product with a Hardier, more Robust, Heavier Gauge, Heavy Duty, Hot Dip Galvanized ROHN WM4 Bracket below...
