|
|
 |
ASKA 2 GHz Satellite TV Antenna Diplexer |
|
|
|
|
ASKA SCS-1 Power Passing Satellite TV Antenna Signal Diplexer (40-2050MHz)
Low Insertion Loss & High isolation design allows off-air and satellite to be fed on a single coax cable. Mini Die cast housing with Zinc plating With Epoxy sealed cover for good weather protection.
This particular Diplexer passes Satellite signal from 950 up to 2050 MHz. The Pass-Band for the Antenna or Cable TV is from 40 to 806 MHz, which is great for HD TV Antenna signals, and Cable TV Systems that have channels up to 750 MHz (Check with your Cable TV System Operator!). Remeber that depending on the example scenario you are following from the DISH Network, DirecTV or other DBS Satellite system, you may need more than one, or several of these devices!
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
|
|
|
|
|
|
|
It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.
|
|
|
|
|
|
|
|
|
Your shopping cart is empty!
|
|
|
