ASKA TGS-41G 4-Way Horz. Splitter 5-1000 MHz. with Ground. All ports no power passing design with blocking capacitors providing excellent intermodulation performance for low distortion interactive operation such as a Cable Modem. Tongue & Groove housing design provides high RFI Shielding for 130dB . The Nickel plated zinc die-cast housing for perfect corrosion protection and grounding. High precision machine threaded F-ports with 360 degree base for full seating of sealing sleeve. F-ports with machine threaded spaced 1inch center to center to accommodate security sleeve and tool. Printed circuit board ensures consistent RF performance and high port to port isolation. Applications vary from headend combining to typical drop installations. This splitter series should be used where increased bandwidth is being designed into the systems.
Availability:Usually ships in 24 Hrs Shipping: Can ship anywhere
Antenna Mounts/ Masts
It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.